LED Dimmer 12V 24V Rotary Panel RF Remote Controller Single Color LED Strip Dimming Kit Wireless 2.4G Remote Control Push Switch
LED Dimmer 12V 24V Rotary Panel RF Remote Controller Single Color LED Strip Dimming Kit Wireless 2.4G Remote Control Push Switch
V1 Single Color LED Controller
● 4096 levels 0-100% dimming smoothly without any ash.
● Match with RF 2.4G single zone or multiple zone dimming remote control.
● One RF controller accept up to 10 remote control.
● Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
● Synchronize on multiple number of controllers.
● Connect with external push switch to achieve on/off and 0-100% dimming function.
● Light on/off fade time 3s selectable.
● Over-heat / Over-load / Short circuit protection, recover automatically.



V1 Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.
● Short press: Turn on or off light.
● Long press (1-6s): Press and hold to step-less dimming, With every other long press, the light level goes to the opposite direction.
● Dimming memory: Light returns to the previous dimming level when switched off and on again, even at power failure.
V1 Light on/off fade time Function
●Long press match key 5s, then short press match key 3 times,
the light on/off time will be set to 3s, the indicator light blink 3 times.
●Long press match key 10s, restore factory default parameter,
the light on/off time also restore to 0.5s.
PK1 Rotary Panel RF Remote Controller
● Apply to single color, dual color or RGB LED controller.
● Rotate knob to change RGB color, color temperature or brightness, support long press or twice click operation.
● Each remote can match one or more receiver.
● CR2032 battery powered.(Battery not included)
● Removeable and stick anywhere easily, or mount on wall use panel base


To fix the panel, two options are offered for selection:
Option 1: fix it on the wall with two screws.
Option 2: adhere it to the wall with paster.
NOTE
For transportation safety. Product does not include batteries. hope to understand




widely used



Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
Share
